Abutment/Pier
|
This drop-down list contains each of the support
lines in the bridge. Select the desired support line to see the list of support
conditions for that support line in the grid. Once in the grid, the support
conditions can be edited for each member bearing.
|
Save DGN
|
The following button will export the
Support Condition 2D model directly and
accurately to Microstation DGN file format, including layers. Save the DGN file
in the desired location and once the export is successful you can browse to
file location and open/view in Microstation.
|
Member
|
This non-editable field will show the each member at
that support along with its member group name.
|
Distance
|
This is the distance between members starting with
Member 1. This field is not currently activated.
|
Absolute Distance
|
This is the cumulative distance between members.
This field is not currently activated.
|
Support Type
|
Select the support type from the drop-down list:
- Pinned -- the
support cannot move in any direction but is free to rotate.
- Roller -- the
support can translate in the direction of the member longitudinal axis and is
free to rotate.
- Fixed -- the
support cannot translate or rotate in any direction.
- Float -- the
support can translate in any direction except global Y and is free to rotate.
See spring constant definitions below.
- Directional -
this support is similar to the roller support but the direction of translation
can be specified as an angle relative to the member longitudinal axis.
|
Angle
|
The angle is measured left/right relative to the
member longitudinal axis. Directional support only.
|
KFX
|
Spring constant in the global X direction in k/ft.
Directional and Float supports only.
|
KFZ
|
Spring constant in the global Z direction in k/ft.
Float support only.
|
KMX
|
Rotational constant about the global X axis in
k-ft/deg. Float support only.
|
KMY
|
Rotational constant about the global Y axis
k-ft/deg. Float support only.
|
KMZ
|
Rotational constant about the global Z axis
k-ft/deg. Float support only.
|
OK
|
Press this button to save all edits and exit the dialog.
|
Cancel
|
Press this button to exit the dialog without saving changes.
|